MICA

MICA is composite material produced from impregnated mineral muscovite with silicon resin. MICA Muscovite has excellent dielectric properties and high-performance temperature insulation up to 500C. Therefore, this composite is extremely used in electro industry. MICA Muscovite can be produced in a shape of tubes and sheets, and they can also be machined to the final part according to a technical drawing.

Characteristics: high voltage insulation, high dimensional stability, high temperature insulation up to 500C.

Components: muscovite and silicon resin

Color: silver

Industries: electro industry

Sheets

  Mica
Mineral Muscovite
Formats #0.3/#50 -1000×2400
#75 – 1000×1200

Tubes

Mica
Mineral Muscovite
Formats ф10-ф700 х 1000

Machined Final Parts

Cost effective and economic solution. One-stop support for your technical needs. We offer production of standard rigid composite materials – technical laminates and their processing to final parts in one place. Our one-stop support is our strength to deliver cost effective final product. 

We offer machining of our MICA Muscovite materials to any final part, produce strictly according to a technical drawing. Our fully equipped machine park including various of CNC machines, standard machines, grinds and manual hand-work processing offers you one-stop production for your technical needs. Our machine park, run by highly motivated engineers and controlled by our QA/QC department ensures us to deliver high quality final parts satisfying and guaranteeing the required tolerances and technical remarks.

Epoxy Glass

Composite materials produced from glass and epoxy resin and pultruded composite materials produced of glass roving and polyester resin. Epoxy glass laminates have very high electrical insulation properties and therefore they are mainly used as electrical insulating material. Epoxy glass composites have very low water absorption. Moreover, epoxy glass laminates have very high mechanical strength for mechanical properties. We produce the epoxy glass composites in a shape of tubes, rods, sheets and they can also be machined to the final part according to a technical drawing.

Characteristics: high voltage insulation, excellent mechanical strength, high dimensional stability, high temperature insulation up to 180C.

Components: epoxy resin and glass fabric

Color: yellow, green

Industries: electro industry, defense, railways

Sheets

Standard Epoxy Glass
DIN 7735 Hgw 2372 Hgw 2372.1 Hgw 2372.2 Hgw 2372.4  
NEMA LI 1 G10 FR 4 FR 5 G 11 155°C G 11 180°C
IEC 60893 EP GC 201 EP GC 202   EP GC 203 EP GC 308

Standard Formats

70/#180 – 580х780
70/#120 – 950×980
0.3/#70 -1230×2160

Rods

Standard Epoxy Glass
DIN 7735 Hgw 2372 Hgw 2372.1 Hgw 2372.2 Hgw 2372.4  
NEMA LI 1 G10 FR 4 FR 5 G 11 155°C G 11 180°C
IEC 60893 EP GC 201 EP GC 202   EP GC 203 EP GC 308

RODS   Diameter (mm) x Length(mm)

ф8/ф60 х 1000
ф50/ф90 х 750

TUBES

Standard Glass epoxy
DIN 7735 Hgw 2375 Hgw 2375.1 Hgw 2375.2 Hgw 2375.4  
NEMA LI 1 G10 FR 4 FR 5 G 11 G 11 180°C
IEC 60893 EP GC 21     EP GC 22 EP GC 308

TUBES Inner diameter (mm) x Length(mm) [ wall thickness <=20; or >20 by special request

ф10-ф700 х 1000
ф6-ф10 х 500

Filament Winding

Filament Winding is a technology for production of tubes and cylinders.  

The technology is a process of glass roving impregnation in resin system and winding of impregnated glass roving on a rotating tool with strictly defined approach and inside diameter.

Characteristic: excellent mechanical properties, strength, they are suitable for machining and are excellent electro-insulators and thermo-insulators

Filament Winding TUBES Inner diameter (mm) x Length(mm)
ф7-ф8 х 500
ф8-ф9 х 1000
ф9-ф15 х 1200
ф15-ф250 х 4500
ф250-ф900 х 2500

         Machined Final Parts

Cost effective and economic solution. One-stop support for your technical needs. We offer production of standard rigid composite materials – technical laminates and their processing to final parts in one place. Our one-stop support is our strength to deliver cost effective final product. 

We offer machining of our Glass Epoxy materials to any final part, produce strictly according to a technical drawing. Our fully equipped machine park including various of CNC machines, standard machines, grinds and manual hand-work processing offers you one-stop production for your technical needs. Our machine park, run by highly motivated engineers and controlled by our QA/QC department ensures us to deliver high quality final parts satisfying and guaranteeing the required tolerances and technical remarks.

Cotton Phenolic

Composite material produced from impregnated cotton fabric with phenolic resin.  Cotton phenolic composite has excellent sliding properties. These technical laminates have very low water absorption and also are very good electrical properties with high dimensional properties. Moreover, cotton phenolic laminates have very high mechanical strength for mechanical properties.We produce the epoxy glass composites in a shape of tubes, rods, sheets and they can also be machined to the final part according to a technical drawing. Cotton phenolic tubes and sheets have very fine machined finish.

Characteristics: low water absorption, heat resistance, mechanical strength

Components: cotton cloth and phenolic resin

Color: brown

Industries: mining, cone crushers for dust seal ring, agricultural spare parts, bushings, insulating sleeves and brushes

Sheets

Standard Cotton phenol Cotton phenol +Graphite
DIN 7735 Hgw 2082 Hgw 2082 +Graphite
NEMA LI 1 C  
IEC 60893 PF CC 201  
Formats #50/#150 – 580х780
#50/#100 – 950×980
#0.5/#50 – 1230×2160

Rods

Standard Cotton phenol Cotton phenol +Graphite
DIN 7735 Hgw 2082 Hgw 2082 +Graphite
NEMA LI 1 C  
IEC 60893 PF CC 201  
Formats ф8/ф50 х 1000   
ф50/ф90 х 750  

Tubes

Standard Cotton phenol Cotton phenol +Graphite
DIN 7735 Hgw 2085 Hgw 2085 +Graphite
NEMA LI 1 C  
IEC 61212 PF CC 22  
Formats ф10-ф700х 1000
ф400-ф800х 660
ф900-ф1600х 450

         Machined Final Parts

Cost effective and economic solution. One-stop support for your technical needs. We offer production of standard rigid composite materials – technical laminates and their processing to final parts in one place. Our one-stop support is our strength to deliver cost effective final product. 

We offer machining of our Cotton Phenol composite materials to any final part, produce strictly according to a technical drawing. Our fully equipped machine park including various of CNC machines, standard machines, grinds and manual hand-work processing offers you one-stop production for your technical needs. Our machine park, run by highly motivated engineers and controlled by our QA/QC department ensures us to deliver high quality final parts satisfying and guaranteeing the required tolerances and technical remarks.